Optipure CTOS-Q10 Replacement Cartridge

Cartridge Benefits:

• IsoNet® – OptiPure’s patented scale inhibiting technology protects equipment against scale and corrosion.

• Reduces maintenance frequency and cost and extends equipment life.

• Gradient-density depth filtration reduces dirt, rust, and other debris as small as 0.5-microns to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.

• Activated carbon filtration makes water taste great and protects equipment against corrosive chlorine.

• High capacity cartridge extends filter system life reducing maintenance frequency.

• Improves equipment operating efficiency by reducing scale and corrosion.

• 1/4 turn QT Qwik-Twist bayonet cartridge makes changing the filter quick, easy and sanitary.

• NSF Certified under Standard 42 as replacement cartridge in OptiPure QTI10 Series Systems.

Specifications

Height: 12.75 Inches

Width: 4 Inches

Depth: 4 Inches

Operating Pressure Range: 10 – 125 psi (0.7 – 8.6 bar)

Inlet Water Temperature Range: 35˚ – 100˚F (2˚ – 38˚C)

Chlorine, Taste and Odor Reduction Capacity: 15,000 gals. (56,775 L)

Service Flow Rate: 1.5 gpm (5.7 lpm)

Sediment Reduction: 0.5 microns (nominal)

Scale & Corrosion Inhibitor: IsoNet (70 grams)

System(s) Cartridge Used In

QTI10-1

SKU: OP133

QTI10-2

SKU: OP132

Installation Tips

• Ensure cartridge is designed to replace the existing cartridge.

• Do not exceed cartridge specifications for temperature and pressure.

• Allow 3” clearance below system for filter cartridge removal and replacement.

• No activation procedure or flushing is required for cartridge to perform as specified.

• Feed-water connection to system should be COLD only.