System Benefits
Significantly reduces scale and corrosion problems related to high TDS, water hardness and chlorides.
Precision blending valve allows the user to accurately and precisely blend filtered water with mineral-addition water to a desired optimized TDS Level.
Digital before and after TDS meter for push-button monitoring of membrane performance and optimized water quality.
High capacity Pre-filters take out sediment and chlorine and protect the RO membrane.
Adjustable reject flow control minimizes water use due to seasonal fluctuations in water temperature.
Sample port enables quick and simple system checks and adjustments.
Built-in pressure gauge allows visual monitoring of operating pressure.
All consumables are easy-to-change Qwik-Twist cartridges.
Integrated system bypass valve eliminates down-time or service interruptions.
Application
Any foodservice equipment where it is desirable to remove existing Total Dissolved Solids (TDS) and provide a consistent balance of buffered TDS
Installation Tips
Feed-water connection to system should be COLD only.
Do not exceed system specifications for temperature and pressure.
Provide a dedicated 1/2” water line to the unit for consistent flow and pressure to the system.
Allow 3” clearance below system for filter cartridge removal and replacement
Connect filtered water line to steam production connections only. Do not use for condenser water.
Detailed installation, operation and maintenance manual is included with each system.
Mount the unit where it can be easily viewed and accessed.
Specifications
Dimensions – Processor : 26.8”h x 20.1”w x 8.4”d
Dimensions Tank: 27.3”h x 16.5”w x 20.4”l
Connection- Feedwater: 3/8” Push Fit Tubing
Operating Pressure Range: 60 – 85 psi at 1.0 gpm (4.1 – 5.9 bar)
Inlet Water Temperature Range: 40° – 100°F (4° – 38°C)
Shipping Weight: 100 lbs
Drain Connection: 2.0 gpm Minimum Flow
Power – Water Processor: 120V 60Hz 6W
Power – Repressurization Pump: 120V 60Hz 2 Amps
Performance
Typical TDS Rejection: >97%
Product Water Production (at 77o F, 60 psi Net Operating Pressure) Production rate is strictly dependent on feed water temperature and pressure: 350.0 gals./day 14.6 gals./hr 0.25 gpm
Blended Water Production: Up to 400 gpd
Replacement Cartridges:
Optipure CTO-Q Pre-Filter #300-05830 x2
Optipure AMS-QT Membrane #204-53040 x1
Optipure MA-Q15 Post-Filter #300-05855 x1
Reviews
There are no reviews yet.